The power plant is composed by 2×425KW MAN gas engine generator CHPs working in parallel, open skid mounted type CHP for indoor applications, driven by engine of MAN E3262LE232 made in Germany, coupled with Leroy Somer alternators and Motortech Cogeneration control system, generation of electricity & hot water simultaneously, total CHP Eff reach over 90.7%...

The cogeneration unit is open skid mounted type, driven by MAN Engine E3262LE202, coupled with Leroy Somer alternators and Motortech all-in-one CHP control system, fueled by landfill biogas through desulfurization & pre-treatment device, generating electricity & hot water simultaneously, with electrical efficiency 38.8%, heat effi 48.3% and total efficiency 87.1%...

The gas power plant consist in 6×1200KW 6.3KV engine generators working in parallel, modularized container generation stations for outdoor application, running in island mode to supply non-stop electricity to loads equipments. Due to hard operations conditions, the genset is with specially designed Air Inlet System against dusty environment and IP44 Protections Level…

Typical WtE projects, the gas power plant consist in 2×1560KW MWM gas engine CHPs working in parallel, containerized CHP units, driven by the most optimum efficiency engine of TCG2020V16/CG170-16, with electrical Eff 41.8%, Heat Eff 44% and total Eff 85.8%. The units are synchronized with mains grid and export energy at government sponsored rates…

The gas generating plant for Gazprom Russia, two phases programs (7MW+8MW), formed by multiple units of 1000kW containerized gensets. The fuel is APG at MN 58, the actual plant output is 12.8MW due to power-derate caused by impurity contents in Fuel, special config. of oil & jacket water heater & heat insulation materials for container building.

A typical WtE project with two phases, the first phase is 3x600kW, the second phase is   4x600kW working in parallel, driven by engine of low speed 8300 series specially designed for biomass gas fuel. By using feedstocks of MSW (Municipal solid waste), through biomass gasifier to produce combustible synthesis gas, the plant is synchronized with utility and export energy…

The auxiliary marine generators are for shipyards in Singapore, running as marine main power generation in open skid mounted type, heat exchanger with sea water pump. Power ratings at 800kW/1000kVa, driven by Cummins marine engine of K38-DM coupled with marathon MP series alternators, TIER II emissions level, certified by CCS marine classification society & EIAPP.

A typical emergency diesel generation power plant for manufacturing facilities located in Incheon South Korea. The generating sets are at power ratings of 600kW/750kVa & 900kW/1125kVa, driven by Cummins engines of KT38-G & KTA38-G4 coupled with Marathon alternators, control system is with ATS/ACS Functions for auto power transfer between genset and state grid utility.

This deal is processed by ETTES sales agency, the generator sets are promoted to Africa markets including Nigeria, Tanzania, Zimbabwe & Zambia etc. Gensets are in soundproof canopy with 8 hours base fuel tanks, driven by Cummins diesel engines of 4B3.9, 6B5.9, 6C8.3 & NT855-G, coupled with Stamford alternators. The gen sets mainly work as emergency power supply.

Located in Rio de Janeiro, project of Airplane sub materials manufacture center, Ettes 2×1000kVa Cummins diesel generator sets in sound attenuated containers driven by engine KTA38-G5, working as emergency power supply. The control system is configured with ATS panel of DSE7320 module to realize non-stop electricity transfer between diesel genset and mains grid.