Gas fuel is LFG (landfill gas), ETTES Typical Project of municipal solid waste(MSW), total plant capacity is 2MW, composed by 4 units of CNPC 500kW driven by Gas Engine H12V190ZLT. The engine generator set type is modularized container engine generation, the gas power plant generators working in parallel and synchronized with state grid and export energy...

The gas cogeneration power generator plant, located in Chile, is formed by 3x1000kW generator sets, the engine generations type is soundproof containerized biogas generators CHP, with special configuration of intelligent closed loop control, the generators in parallel working with mains grid to drive loads while to generate hot water for heating biogas digester...

Generation projects for Russia Gazprom, gas fuel is APG (oilfield associated petroleum gas with methane number of 58). Total plant capacity is 6MW, 6x1000kw working in parallel, the actual output is 4.4MW due to sub-quality of gas conditions. Gas Motor is CNPC 190 SERIES H16V190ZLT, main components of gas control system are from Motortech with high reliability.

Project of Combined Heat and Power, total plant capacity is 6MW, composed by MAN 560kW CHPs driven by Gas Engine E3262LE202 coupled with LSA alternator & ETTES ECC300 fully intelligent control system. The generator running mode is operation at networks, parallel working with mains grid to drive loads while to generate hot water for heating green house.

Highlight project of ETTES POWER Gas Generation, two phases projects, gas fuel is CNG with methane number of 81 at pressure 48kPa, 9×500Kw Gas gensets driven by Engine KTA38-G working in parallel for COP application. Modular containerized generator, with special demand of B class TEMP rise, IP 44 Protection level, space heater, R450 AVR and AREP/PMG System.

The generations units are for backup power for telecom communications centers, 2×1600Kw gensets working in parallel, open type power generating set driven by Deutz engines of TBD620V16, coupled with Siemens high voltage alternators, configured by high voltage cubicles of PT cabinet, DC panel, Parallel Panel, High voltage switch gear panel & Main outlet panel etc…

The plant consists 7x500KW ETTES brand Syngas Biomass engine CHP working in parallel and synchronized with mains. The Cogeneration is for both electricity generation to export energy to utility, while heat recovery from exhaust to generate hot steam to heat dry stocks (raw materials of sawdust & woodchips), forming a comprehensive high efficient energy utilization system …

The power plant consists 7x500KW Syngas Biomass engine CHPs working in parallel (1 unit standby) and synchronized with mains grid. The biomass fuel is produced from gasification processing of raw materials of sawdust & woodchips. Generations of electricity & hot steam for comprehensive energy utility system, the plant investment recovery time is 18 months only…

By gasification processing of ricehusks & woodwastes, producing combustible synthesis biomass gas fuel, The power plant is composed of 8x500kW engines working in parallel & synchronized with GRID, exporting energy at sponsored rates. The engine is low speed 8300 series at 600RPM, coupled with Siemens IF6 Series alternators & USA Alronic ignition systems…

The power plant consist 6x500KW (8300 series, low speed of 600RPM) working in parallel & run in COP applications. The syngas is byproduct during coke-production in coking plant, with high hydrogen content 60%~65%, ETTES designed internal mixing system to avoid problems of back-fire & cylinder knocking. In General, 3CBM syngas can generate 1KWH electricity…