3.5MW Syngas-Biomass Engines Power Plant to Croatia
Publish Time: 2013-12-25 Origin: Ettes News Channel
Project Profile of Gas Power Plant | Project Name | 3.5 MW SYNGAS-BIOMASS Power Plant in Croatia |
Working Area | Biomass Gasification Plant, Croatia | |
Gas Fuel | Syngas/Biomass from Woodships and Sawdust Gasification | |
Genset Type | Open Skid Genset located in the engine house, CHP System from Exhaust Gas for Steam to dry feedstock. | |
Gensets Number | 7x500KW working in parallel (6 units work, 1 unit backup) | |
Operating Mode | working in parallel | |
Gas Generation Config. | Genset Model | EZ-500S5 |
Rated Power | 500kW | |
Gas Engine | Specially designed for low quality gas. 8 cylinders in line, displacement 215L, Bore x Stroke: 300 x 380mm, Naturally Aspirated (No Turbocharger and Intercooler), Speed 600RPM | |
Burn Technoiogy | Rich Burn | |
Cooling Method | Open Water Cooling by Heat Exchanger + Cooling Tower | |
Alternator | Siemens 1FC6 Series (50HZ, 400V) | |
Contorl System | Synchronization Parallel Control | |
Governor/Actuator | Synchronization Parallel Control | |
Gas Mixer | Venturi Type (specially designed for syngas fuel) | |
Ignition System | Altronic from USA | |
Others | Working Mode | Non-stop 24 Hours Continuous Working |
Gasifier Maker | Supplied at local, developed by Hyundai Engineering and Seoul National University | |
Applications | The project is private investment and government supported Syngas/biomass from Gasification of woodships and sawdust. Using engine for generation and selling electricity to Mains Grid. Using heat recovery from exhaust gas to dry feedstock. | |
Commissioning Year | November 2013 |