3MW Syngas Biomass Power Plant in Guatemala
Publish Time: 2015-11-25 Origin: Ettes News Channel
Project Profile of Gas Power Plant | Project Name | Syngas Gasification Power Plant |
Working Area | Guatemala | |
Gas Fuel | Syngas/Biomass Gasification from Woodchips, Sawdust, Coconuts and other wastes | |
Genset Type | Open Skid Genset | |
Gensets Number | 7x500KW working in parallel (1 unit backup) | |
Starting Method | Compressed Air Starting System | |
Operating Mode | working in parallel | |
Gas Generation Config. | Genset Model | EZ-500S5 |
Rated Power | 500kW | |
Electric Eifficiency | 33% | |
Gas Engine | Specially designed for low quality gas. Engine of 8300D/M-1, 8 cylinders in line, displacement 215L, Bore x Stroke: 300 x 380mm, Naturally Aspirated (No Turbocharger and Intercooler), Rotation Speed 600RPM | |
Burn Technoiogy | Rich Burn | |
Cooling Method | Open Water Cooling by Heat Exchanger + Cooling Tower | |
Alternator | Siemens 1FC6 Series (60HZ) | |
Contorl System | Synchronization Parallel Control | |
Governor/Actuator | Synchronization Parallel Control | |
Gas Mixer | Venturi Type (specially designed for syngas fuel) | |
Ignition System | Altronic from USA | |
Others | Mixing System | Specially designed for low quality syngas |
Gasifier Maker | Supplied at local, developed by Hyundai Engineering and Seoul National University | |
Applications | WtE (Waste to Energy project) project. Syngas gasification of coconuts, woodchips, sawdust and woodwastes. By using engine for power generation and heat recovery from exhaust for hot steam for heating feedstocks, exporting energy to Mains Grid at high subsidy rate. | |
Commissioning Year | Oct 2015 |