CNPC Container NG Series

Name: CNPC Container NG Series
Brand: Ettes Power
Rating: 5.0 (29 reviews)

Genset Features

► About CNPC Engines

CNPC Series gas engines are developed by cooperation with AVL from Germany and Austria. The engine assembling plant is affiliated to CNPC (China National Petroleum & Oil Corporation), which is the first and the largest engine manufacture in China since 1953. CNPC engine generator performance is “Leading China” and “First class Global”, which work widely in 80% of China Oil & Gas Fields, Coalmines, Vessels and other areas under harsh working conditions, enjoy high reputation in global.

► About Ettes-CNPC Gas Engine Generators

400kW~1200kW, Powerful, Big Displacement, Strong loads-starting-ability, Long Service Life

Ettes CNPC series gas fired generators & CHPs are driven by engines series of 6140, 12V190, G12V190 and H16V190 etc, with merits of big displacement, sufficient reserve-power, strong capability against loads-surge, easy for installation & maintenance, long overhaul, widely used in oil & gas fields, coalmines and wild construction etc. It is the ideal solution for electrical generation to drive loads under harsh conditions for island operation.

Besides standard package of gas driven generator, Ettes can satisfy client’s special requirements and make tailored design like CHP(combined heat and power), Cogeneration, trigeneration ,combined cold heat and power (CCHP), ATS, Parallel operation system, Remote monitor & Control, Modularized soundproof & weatherproof container, which can realize the most efficient and comprehensive use of energy and generate electricity, hot water, cooled water, hot steam or hot oil etc.

► Customer Benefits for CNPC Gas Power Generation

• The engine performance is “Leading China” and “First class Global”

• Long history: produced by engines plant under control by CNPC (China National Petroleum & Oil Corporation), it is the first and the largest engine manufacture in China since 1953.

• Proven Technology: widely used in 80% of China Oil & Gas Fields and Coalmines under harsh working conditions.

• Fuel flexibility: a wide range of methane based gases including natural gas and biogas etc.

• Designed for intensive use (continuous duty), able to act as main power supply or standby power supply.

• Capable of working with variable loads, strong capability of against loads-surge.

• Advanced technology of close-loop control, lean-burn and Mixing before turbo.

• Adopting highly intelligent gas control system of USA Woodward EGS, Germany Heinzmann or Motortech, the air fuel ratio can be automatically adjusted as per fluctuation of gas components.

• Adopting intelligent & digital ignition system from Germany Motortech or USA Altronic.

• Adopting super-turbocharged technology from ABB.

• Heat Recovery system to realize CHP, Cogeneration and Distribution Energy.

• Integrated & modularized unit to facilitate easy transport and quick setup.

• Easy Maintenance in low operations cost due to enchanced materials adopted.

• Ensured annually continuous working over 8000 hours and long engine-life-span of over 45000 hours.

• Service and Spare parts are widely and easily available, supplied by service center ETTES POWER.

• ETTES POWER gas fueled generator in various fields, based on electricity generation, making heat Recovery system to realize CHP, Cogeneration for Distribution Energy System.

All data provided on this site is for information purposes only, explicitly non-binding and subject to changes without further notice.

► About Production Standards & Certification

• Prevailing Industry Standards: ISO3046，ISO8528，GB2820, BS5000PT99,AS1359,IEC34, DIN6271, BS5514.

• ISO Standards: ISO9001:2008, ISO14001, ISO45001 (former OHSAS 18001)

• National & Regional Conformity Standards: CE, UL, EPA, CSA and SONCAP etc.

• Third Party Certification for Gensets: SGS, CCS, BV, ABS and DNV-GL etc.

► Adopted World Top Materials to Assemble Gas Generating Set

• Gas Engines Brands: Cummins, MAN, MWM, CNPC

• Alternators Brands: Stamford AVK, Leroy Somer, Marelli, or Mec calte

• Control System: Deepsea, ComAp or DEIF

• Air Circuit Breaker/Switchgear: ABB, Schneider, Eaton or Siemens

• Governing Actuator: Germany Mototerch, Heinzmann, USA Woodward or Swiss Huegli

• Air-Gas Mixer: Auto, Electrically controlled, Germany Motortech or Swiss Huegli

• Ignition System: Germany Mototerch, USA Altronic or Swiss Huegli

• Key Materials of CHP System: Siemens, Alfa laval, Swep and Grundfos

• Gas Train (safty valves): Germany Dungs, Chroms or Italy Madas

• Tailored configuration: Common soundproof canopy, 20 & 40 feet modular container, ATS/ACS system, Synchronization parallel panel, Remote control & Scada system, Oil & cylinder water heater, Anti-condensation heater (space heater), Digital AVR, AREP/PMG system, IP44 protection level & B class temperature rise, High voltage alternator (3.3kV, 6.3kV, 10.5kV etc.), CHP, CCHP, and Trigeneration etc.

► Applicable Gas Fuels & Quality Requirements

• Pipeline Natural Gas (PNG, CNG, LNG)

• Oilfield APG (Associated Petroleum Gas)

• Coalmine Methane Gas

• CBM (Coalbed Methane)

• Well Gas, Shale Gas & Other Methane Based Gases

• Gas Fuel Quality Requirements

Composition	Abbr.	Limits	Remarks
Methane number	MN	＞80 for natural gas	For Lower value, please consult ETTES POWER
Calorific value	Hμ，N	Lower value of 36MJ/Nm⊃3;	Standard Calorific Value for Ettes Datasheet as per ISO8528/1, ISO3046/1 and BS5514/1.
Chlorine	CL	＜80 mg / Nm⊃3; CH4	For higher value, please consult ETTES POWER
Fluoride	F	＜40 mg / Nm⊃3; CH4	For higher value, please consult ETTES POWER
Total-chlorine Fluoride	∑(Cl,F)	＜80 mg / Nm⊃3; CH4	For higher value, please consult ETTES POWER
Dust	/	＜5μm ＜10 mg / Nm⊃3; CH4	For higher value, please consult ETTES POWER
Oil Vapor	/	＜400 mg / Nm⊃3; CH4	No condensation may occur in the mixture section
Silicon Element	Si	＜2 mg / Nm⊃3; CH4	For higher value, please consult ETTES POWER
Sulphur	S	＜200 mg / Nm⊃3;	For higher values, please consult ETTES POWER
Hydrogen Sulphide	H2S	＜150 ppm or ＜228 mg / Nm⊃3;	For higher value, please consult ETTES POWER
Ammonia	NH3	＜40 ppm or＜30 mg / Nm⊃3;	For other values, please consult ETTES POWER
Gas Pressure Range	/	100kPa~400kPa	For other values, please consult ETTES POWER
Gas Temperature	/	＜30℃	For other values, please consult ETTES POWER

► Typical Diagram of Ettes CNPC Series Gas Generator CHP

► Typical Application Fields

50Hz Models List

Models List of CNPC Natural Gas Gensets & CHPs (50Hz, 1000rpm)
Model	Elec. Power (kWe)	Heat Output (kWt)	Engine Model	Engine Power (kW)	Cyls. & Type	Dspl.(L)	Elec. Eff.	Heat Eff.	Total Eff.	PDF D/L
EJ-300N5	300	375	JC15DT	350	6.L	15	37.2%	46.5%	83.1%
EJ-500N5	500	627	12V190ZDT	600	12.V	71	36.1%	45.3%	81.4%
EJ-600N5	600	770	12V190ZL	660	12.V	71	37.0%	47.5%	84.5%
EJ-700N5	700	903	12V190ZL	750	12.V	71	37.2%	48.0%	85.2%
EJ-1200N5	1200	1416	H16V190ZLT	1320	16.V	97	38.3%	45.2%	83.5%
EJ-2000N5	2000	2258	L20V190ZLT	2200	20.V	145	40.2%	45.4%	85.6%

Remarks:

• Above Gensets are based on 50Hz, 1000rpm, 400V, 3 Phases & 4 Wires.

• According to ISO3046-1 at U=0.4kV, cosphi=1.0 for 50Hz, methane number of natural gas＞80, lower calorific value: LHV>36MJ/Nm⊃3;.

• Electrical efficiency is based on cosphi =1.0 and ISO3046 conditions. Heat is recovered from jacket water and exhaust gas cooled to 120℃.

• Operations conditions is based on ambient temperature -25-25℃ and altitude less than 1000m.

• For power deratings caused by other temps and altitudes, please consult Ettes Power.

• Other low voltages and high voltage of 3.3kV, 6.3kV and 10.5kV are available for options.

• Models with "N" for Natural gas (CNG, PNG, LNG, Shale Gas, Oilfield Associated Gas and Coalmine Gas etc).

• Special configurations for Soundproof Canopy & Container, ATS and Synchronizing Parallel System are available for options.

• Special configuration of CHP, CCHP (trigeneration), Cogeneration are available for options.

• All data provided on this site is for information purposes only, explicitly non-binding and subject to changes without further notice.

60Hz Models List

Models List of CNPC Natural Gas Gensets & CHPs (60Hz, 1200rpm)
Model	Elec. Power (kWe)	Heat Output (kWt)	Engine Model	Engine Power (kW)	Cyls. & Type	Dspl.(L)	Elec. Eff.	Heat Eff.	Total Eff.	PDF D/L
EJ-300N6	300	375	JC15DT	350	6.L	15	37.2%	46.5%	83.1%
EJ-500N6	500	627	12V190ZDT	600	12.V	71	36.1%	45.3%	81.4%
EJ-600N6	600	770	12V190ZL	660	12.V	71	37.0%	47.5%	84.5%
EJ-700N6	700	903	12V190ZL	750	12.V	71	37.2%	48.0%	85.2%
EJ-1200N6	1200	1416	H16V190ZLT	1320	16.V	97	38.3%	45.2%	83.5%
EJ-2000N6	2000	2258	L20V190ZLT	2200	20.V	145	40.2%	45.4%	85.6%